U型亚新(中国)官网的建筑设计的分类
A.U型亚新(中国)官网按表面处理方式不同,有普通压花亚新(中国)官网、彩色亚新(中国)官网等,设计选用时除普通压花亚新(中国)官网外,选用其余亚新(中国)官网应予注明。
B.U型亚新(中国)官网属不燃烧材料,如有特殊要求时应按有关规范进行设计。
C.U型亚新(中国)官网分类:
—按颜色分:有色的和无色的。
—按表面状态分:有平滑的和带花纹的。
—按强度分:有钢化、贴膜、保温层
—按规格分:有钢化、贴膜、保温层
D.U型亚新(中国)官网属不燃材料,如有特殊要求时按有关规范进行设计。
E.U型亚新(中国)官网两翼的朝向测试结果表明两翼向迎风面内,强度高于两翼背风面。
F.U型亚新(中国)官网按造型及建筑使用功能分别采取以下组合方式:
G.U型亚新(中国)官网隔墙长度大于6000,高度超过4500时,应核算墙身的稳定,采取相应的措施。
H.U型亚新(中国)官网用于湿度较大的房间且室内外温差较大时,应处理好亚新(中国)官网表面露水的排泄及下滴问题。
I.U型亚新(中国)官网用于圆型墙及屋面时,曲率半径不应小于1500。
A. U glass according to the surface treatment method, there are ordinary embossed glass, stained glass, etc.. In addition to ordinary embossed glass, the selection of the rest of the glass should be noted.
B.U glass is a non-combustion material and should be designed according to relevant specifications if there are special requirements.
C. U type glass classification:
By color: colored and colorless.
By surface status: Smooth and patterned.
-By strength: there is a toughening, film, insulation layer
-According to specifications: there are steels, film, insulation layer
D. U glass is a non-flammable material and is designed according to relevant specifications if there are special requirements.
The orientation test results of the E.U-type glass wings show that the strength of the wings is higher than the leeward sides of the wings.
F.U glass adopts the following combination methods according to its shape and architectural function:
G.U-type glass partitions with a length of more than 6,000 and a height of more than 4,500, the stability of the wall body should be calculated and corresponding measures should be taken.
H. U glass is used in large humidity rooms and when the temperature difference between indoor and outdoor is large, the excretion and droplet of glass surface dew should be handled.
When I.U glass is used for round walls and roofs, the radius of curvature should not be less than 1500.